![]() Matters needing attention when using high temperature conductive puttyPublished by:2020-9-4 Categories:Industry news Viewed by: 4690 times If you need to use high-temperature resistant putty on a machine, of course, you should choose high-temperature resistant putty. If you want to use electrostatic conductive putty, you should choose electrostatic conductive putty. However, we need both static conductive and high temperature resistant putty, and there is also a suitable product, such as high temperature conductive putty. Of course, choosing a good product is easy to use, but some misunderstandings have to be avoided. For example, when using atomic ash, we hope that the drying speed can be faster, which can effectively improve the work efficiency and reduce the waiting cost. However, the production of high-temperature conductive putty is prepared according to a certain drying time for the construction personnel. If the drying speed is too fast, and the later construction operation is not good, it is very easy to have various small problems. For example, when using high-temperature conductive putty, add twice the amount of curing agent to accelerate the drying speed. In fact, this method is not recommended, because curing reaction may occur during the construction process.
Therefore, in order to avoid too fast curing and drying, we must pay attention to the appropriate proportion of high-temperature conductive putty and curing agent during construction, and do not blindly pursue fast. |
![]() |
![]() |
About us |
![]() |
Product Categories | ![]() |
Contact way Address: 268 Hongchang Road, Changxing County, Huzhou City, Zhejiang Province |
Copyright © 2020 Changxing Baodi Environmental Protection Technology Co., Ltd all reserved | Web Admin --> >> |